Suitable for glass cutting operations such as building doors and windows, lenses, craftsmanship, decoration, and coating.

Features:

More accurate accuracy and high cutting rate;

High safety performance and small footprint;

Stable performance and complete functionality;

Easy to operate and save manpower

（1） RF-2520 upper part

Technical parameters:

1. Range of upper film size: minimum upper film size of 1200 * 700

Maximum upper plate size: 2500 * 2000mm

2) Upper film thickness: 1-3mm

3) Fastest loading cycle: 15-25 (adjustable)

4) Maximum loading capacity: 300KG

Number of one-sided upper film arms: 4 arms.

6) Single arm suction capacity: 4

⑦ Installation power supply: 380V/50HZ (special circumstances can be adjusted according to customer requirements)

8) Installation power: 10kW

9) Compressed air: 0.3Mpa

10) Vacuum pressure: -50~9oKpa (adjustable according to glass thickness)

（2） RF-2520 fully automatic cutting machine

Basic performance:

1. Equipment specifications:

*Maximum size of glass that can be cut: 2500 * 2000mm

*Workbench height: 900 ± 50mm

*Cutting thickness: 1-3mm

2. Cutting parameters:

*Parallelism of straight lines: s0.25mm/m

*Diagonal accuracy: 50.25mm/m (the above accuracy is based on the cutting line accuracy before breaking)

*Cutting bridge linear speed: 0-160m/min (Adjustable)

*Cutting bridge acceleration ≥ 3.0m/s2

*Blade holder linear speed ≥ 150m/min

*Blade holder acceleration ≥ 6.0m/s2

*Cutting head positioning accuracy error of 0.15mm

3. Power supply/power:

*Installation power requirement: 380V/5OHZ

*Compressed air: 0.8PA.

4. Equipment performance

*Device framework: processed

*Cutting blade holder: 360 degree rotation, upper and lower cutting of the blade (can accurately cut any straight line and various irregular shaped glass)

*Countertop: black insulation board

*Positioning system: mechanical positioning and photoelectric scanning surface positioning

*Oil supply method: automatic oiling. Synchronize with cutting

5. Mechanical part

*Rack: Japanese KHK diagonal rack

*Guide rail: Taiwan Shangyin (square guide rail)

*Timely processing gantry

*Knife wheel/wheel clamp: Bohler, Germany.

6. Electrical components

*Using domestic computer hosts and Microsoft Windows interface.

*Voltage: 380V/50Hz.

*Motor: German servo motor

*Proximity switch: Schneider (France)

*Control card: Baolun (GELTU, USA)

*Main electrical components: Beford (Sino German joint venture)

*Pneumatic proportional valve: Japanese SMC