Glass cutting machines are widely used in the production of glass curtain walls, glass partitions, glass display windows, glass doors and windows, etc. In the field of home decoration, glass cutting machines are often used to make glass furniture, glass tableware, glass artworks, etc. In the glass processing industry, glass cutting machines are indispensable production workers.

Cutting parameters:

★ Parallelism of straight lines: 0.25mm/m

★ Diagonal accuracy: 0.30mm/m (the above accuracy is subject to the cutting line accuracy before breaking)

★ Cutting bridge speed: 0-160m/min (Adjustable)

★ Cutting bridge acceleration ≥ 3.0m/s ²

★ Blade holder speed ≥ 150m/min

★ Blade holder acceleration ≥ 6.0m/s ²

★ Air flotation transmission

★ Cutting head positioning accuracy error ≤ ± 0.15mm

Power supply/power:

★ Installation power requirements: 380V/50HZ

★ Actual power of the equipment: 11.5KW.

★ Compressed air: 0.6PA.

Function Introduction：

★ Equipment framework: After aging treatment, it ensures that the tabletop does not deform and the parallelism is fine.

★ Cutting blade holder: The blade rotates 360 degrees and can cut glass in an up and down manner (capable of cutting any straight line and various irregular shapes)

★ countertop: Made of waterproof panels. It can effectively prevent moisture and does not deform.

★ Felt: Foreign industrial felt (fibers and wool) has good flatness and can prevent static electricity.

★ Positioning system: pneumatic mechanical and photoelectric scanning positioning.

★ Oil supply method: Pneumatic automatic oil injection. Synchronize with the downward cutting,

Mechanical part

★ Platform: Adopting the foreign Kangbeite version (flatness ≤ ± 0.20mm/m)

★ Gear rack/guide rail: Japanese KHK

★ Knife wheel/wheel clamp: German Bohler.

Electrical components

★ Adopting domestic computer host and Microsoft Windows interface.

★ Voltage: 380V/50HZ. The equipment is equipped with a voltage stabilizing device.

★ Motor: Yaskawa servo motor (both irregular and linear cutting effects are very good).

★ Guide rail: Taiwan Shangyin

★ Rack: KHK

★ Proximity switch: Chint

★ Control card: Baolun.

★ Main electrical components: Omron and Chint.

★ Pneumatic proportional valve: Japanese SMC

★ Software: Zhongbao Wheel Cutting Software and Optimization Software (optional)