1. Safety glass: Safety glass usually includes tempered glass, which has high hardness and strong toughness. When cutting, it is necessary to use fixed cutting equipment, cut according to size requirements, and then temper. The processing process consumes a large amount of power resources, and in terms of equipment selection and use, unit energy consumption should be fully considered.¹
2. Architectural glass: Architectural glass mainly includes flat glass, window glass, curtain wall glass, etc. Glass deep processing enterprises generally formulate a special policy to meet the needs of zero order patch and sample production.
3. Hollow glass: Hollow glass is composed of two or more layers of flat glass. The outer processing technology and process of insulating glass may be completely different, but it is required to reach the hollow at the same time for lamination treatment. The accuracy and timeliness of hollow lamination, which can reduce work in progress, improve production efficiency, and ensure delivery time, are important requirements for glass deep processing.
4. Craft glass: Craft glass requires secondary artistic processing, which is used for engineering decoration, outdoor decoration, home decoration, etc. The cutting of craft glass requires cutting various complex shapes such as curves. The cutting tool cannot form cracks after cutting the glass. The edges of the processed glass need to be ground and polished, and the processing process requires high precision and complexity.
5. Optoelectronic glass: Optoelectronic glass refers to the organic combination of light, electricity, and glass. Optoelectronic glass is mainly used for display, with a wide range. The color of optoelectronic glass can be customized according to customer requirements.
6. Energy saving glass: Energy saving glass usually provides insulation and heat preservation, such as heat absorbing glass, heat reflecting glass, low radiation glass, insulating glass, vacuum glass, and ordinary glass. Energy saving glass is also widely used in buildings.

Product features：

More accurate accuracy and high cutting rate;

High safety performance and small footprint;

Stable performance and complete functionality;

Easy to operate and save manpower

Technical parameters:

1) Upper dimension range: minimum loading size: 1800×1000mm (on one side)

2) . maximum loading sheet size: 4200×2800mm；

3) Thickness of glass sheet: 2 ~ 19mm;

4) Suction depth: 750mm;

5) X-axis traveling speed: 5 ~ 25m / min (adjustable);

6) Y-axis travel speed: 8 ~ 12m / min (adjustable);

7) Conveying speed: 5-25m / min (adjustable);

8) Number of turning arms: 8 arms (double side);

9) Number of single arm suction cups: three;

10) Loading arm: double side;

11) Loading cycle: 20-35s adjustable (30s for each additional station);

12) Installation power supply: AC380V / 50Hz (special circumstances can be adjusted according to customer requirements);

13) Total installed power: 8-17kw;

14) Compressed air: 0.6 ~ 0.8MPa;

15）Vacuum degree: - 50 ~ - 99kpa (adjustable according to glass thickness);

16) Table height: 900 ± 20mm;

17) Overall dimension: 4800×2800×900mm